SPB3000 Digital DMR Module
DMR Tier3&2, Analogue; Smart size with high integration;4W RF Power (7.4V);Standard AT command
Product Details
Product Feature
DMR Tier3&2, Analogue
Smart size with high integration
4W RF Power (7.4V)
Standard AT command
Technical Spec
Standard | DMR Tier3&2 ETSI-TS102 361-1,-2,-3 MPT1327 | ||
modulation mode | FM、4FSK | ||
Interface | Antenna interface | IPEX connector | |
data interface | 40PIN | ||
Channel spacing | 12.5KHz/20 KHz /25 KHz | ||
working voltage | 7.4v (rated) ± 15% | ||
electric current | Standby current | 120mAh | |
Receiving current | 140mAh | ||
Maximum emission current | <2A | ||
Current @ 4W | About 1.4A | ||
size | Length * width * height: 60 * 50 * 6.4 mm | ||
Transmission part | |||
frequency range | UHF1:350-400MHZ; UHF2:400-470MHZ; | ||
RF power output | Power: 4.2w; | ||
FM modulation mode | 11K F3E @12.5KHz 14K F3E @20KHz 16K F3E @25KHz | ||
4FSK digital modulation mode | 12.5khz data: 7k60fxd 12.5khz data and voice: 7k60fxw | ||
Spurious emission | -36dBm | ||
Modulation limitation | 2.5KHz @ 12.5KHz 5.0KHz @ 25KHz | ||
FM noise | 40dB @ 12.5KHz 45dB @ 25KHz | ||
Adjacent channel power ACP | 60dB @ 12.5KHz 70dB @ 20/25KHz | ||
ToneBytes Wowcoder VST | AMBE++ | ||
Receiving part | |||
sensitivity | Analogue | 0.22 μ V (typical) (12dB SINAD) | |
Digital | 0.22 μV /BER5% | ||
Adjacent channel selectivity | TIA-603/ETSI | ≥60dB @ 12.5KHz/70dB @ 20&25KHz | |
intermodulation | TIA-603 | ≥70dB @ 12.5/20/25KHz | |
ETSI | ≥65dB @ 12.5/20/25KHz | ||
Spurious Response | TIA-603,ETSI | ≥70dB @ 12.5/20/25KHz | |
Audio power (max) | 16Omega | 30mW | |
32Omega | 15mW | ||
Environmental indicators | |||
temperature | working temperature | -30℃~+60℃/ | |
Storage temperature | -40℃~+85℃ | ||
